How to Connect Skullcandy Earbuds

Skullcandy earbuds use standard Bluetooth pairing and connect to Android phones, iPhones, laptops, and tablets in under a minute. Whether you are setting up a new pair or reconnecting after a reset, the process is consistent across all Skullcandy models. Understanding the pairing steps, reset process, and basic troubleshooting ensures your earbuds connect reliably every time without frustration.
 

Getting your new earbuds is now budget-friendly. Simply browse the selection of earbuds on Bajaj Mall. Alternatively, visit any of Bajaj Finserv’s 1.5 lakh partner stores in 4,000 cities in India. Choose the product that you like and get Easy EMI and zero down payment offers exclusively with Bajaj Finserv’s financing options. Check your loan eligibility and convert the cost of your new earbuds into Easy EMIs.

Skullcandy earbuds enter pairing mode automatically or via a button hold, making first-time setup quick and straightforward. Here is the standard pairing process.

• Remove earbuds from the case — most Skullcandy TWS models enter pairing mode automatically on first removal, with the LED flashing red and blue.
• For non-TWS models, press and hold the power or multifunction button for three to five seconds until the LED flashes and you hear a pairing tone.
• Open Bluetooth on your device and wait for the Skullcandy earbud name to appear in the available devices list within a few seconds.
• Tap the earbud name to pair — a voice prompt or tone confirms a successful connection on most Skullcandy models.
• Once paired, your device remembers the earbuds and reconnects automatically on subsequent uses without repeating the pairing process.

Connecting Skullcandy earbuds to an Android phone follows the standard Bluetooth pairing process available on all Android versions. Here are the steps.

• Pull down the notification shade and long-press the Bluetooth icon to open Bluetooth settings directly — or go to Settings and tap Connections, then Bluetooth.
• Enable Bluetooth if it is not already on — Android begins scanning for nearby devices immediately once Bluetooth is active.
• Put your Skullcandy earbuds in pairing mode by removing them from the case or holding the button until the LED flashes red and blue.
• Tap your Skullcandy earbuds' name under Available Devices — Android connects within seconds and displays "Connected" in the Bluetooth menu.
• Set earbuds as default audio output by tapping the settings icon next to the device name and confirming media and call audio both route through the earbuds.

Skullcandy earbuds pair with iPhones through the standard iOS Bluetooth settings menu — the process is identical across all iPhone models running iOS 10 or later.

• Open Settings on your iPhone and tap Bluetooth — ensure the toggle is green to confirm Bluetooth is active and scanning.
• Put your Skullcandy earbuds in pairing mode — remove from the case or hold the button until the LED flashes alternately red and blue.
• Find your Skullcandy earbuds under Other Devices in the iOS Bluetooth menu — they appear within a few seconds of entering pairing mode.
• Tap the earbud name to connect — a voice prompt or connection tone from the earbuds confirms successful pairing with your iPhone.
• Test audio immediately by playing a track — if sound plays through the iPhone speaker instead, tap the audio output icon in Control Centre and select your earbuds manually.

Resetting your Skullcandy earbuds clears all stored pairing history and restores factory defaults — useful when earbuds stop connecting or behave unexpectedly. Here is how to reset and reconnect.

• Place both earbuds in the case and close the lid for 10 seconds before beginning the reset — this ensures both earbuds are powered off and synchronised before the reset process starts.
• Press and hold the button on each earbud for approximately six seconds until the LED flashes yellow or you hear three beeps — the exact sequence varies slightly by Skullcandy model.
• Open the case lid after the reset — the earbuds re-enter pairing mode automatically, indicated by alternating red and blue LED flashes.
• Delete the old Skullcandy pairing from your phone's Bluetooth settings by selecting Forget Device before attempting to reconnect as a new device.
• Re-pair normally by selecting the Skullcandy earbuds from your phone's Bluetooth device list — the earbuds connect cleanly after a full reset.

If your Skullcandy earbuds are not connecting, dropping audio, or failing to appear in the device list, these targeted steps resolve most issues quickly.

• Toggle Bluetooth off and on from your phone's settings or quick panel — this resets the Bluetooth radio and clears most temporary pairing failures instantly.
• Forget and re-pair — go to Bluetooth settings, tap Forget Device next to your Skullcandy earbuds, put the earbuds in pairing mode, and reconnect as a new device.
• Charge both earbuds and the case — a low battery on either earbud prevents reliable pairing and causes one earbud to disconnect during use.
• Move away from Bluetooth interference — crowded areas with many Wi-Fi networks and Bluetooth devices on the 2.4 GHz band cause audio dropout; moving to a less congested environment restores stable connectivity.
• Perform a full factory reset if all other steps fail — clear all pairings, re-pair to your device, and test audio before concluding there is a hardware fault.
   

Thinking of buying new earbuds?

Before you do that, explore the latest offers from Bajaj Finserv. You may find a great deal on a model that matches your needs.

Bajaj Finserv’s Maha Bachat Savings Calculator helps you unlock maximum savings every time you shop at partner stores. It brings together all available brand, dealer, and scheme offers—so you can see your total savings instantly and shop smarter with Easy EMIs.
 

1. Dealer offers - Grab exclusive in-store deals at over 1.5 lakh partner stores across India. Enjoy local discounts and special prices you will not find online.

2. Brand offers - Access limited-time discounts from top brands across electronics, appliances, and more. Discover brand-specific savings selected just for you.

3. Bajaj offers - Unlock exclusive Bajaj Finserv deals on popular products—available only to our customers. More rewards, more value.

4. Scheme offers - Take advantage of time-sensitive offers on select EMI schemes. Get extra benefits after paying just 3 EMIs—visible during EMI selection at checkout.
 

Calculate your extra savings today!

Upgrading your home with the latest electronics and appliances is now easier and more affordable with Bajaj Finserv’s flexible financing options. You can also maximise your savings by using the Maha Bachat Savings Calculator—a smart tool that combines brand offers, dealer offers, and EMI offers, all in one place, helping you lower the overall cost while still paying in small, bite-sized instalments. Follow these steps to get started:

• Explore products on Bajaj Mall: Browse a wide range of electronics and appliances from trusted brands on  Bajaj Mall. Compare features like energy ratings, storage capacity, performance settings, and design to choose the right product for your home.
• Visit a partner store: Once you shortlist a model, step into any of Bajaj Finserv’s 1.5 lakh partner stores across 4,000 cities in India. See the product in person, talk to experts, and make a confident decision.
• Choose the Easy EMI Loan option: At checkout, select the Bajaj Finserv Easy EMI Loan. Avail financing of up to Rs. 5 lakh and split the cost into convenient monthly instalments. Some products also come with a zero down payment option.
• Check your loan eligibility online: Plan better by checking your loan eligibility in minutes. Simply enter your mobile number and OTP to know your pre-approved limit.
• Use the Insta EMI Card for purchases up to Rs. 3 lakh: Already own the Bajaj Finserv Insta EMI Card? Use it for instant, paperless checkout and convert your purchases of up to Rs. 3 lakh into Easy EMIs.